小計量顆粒包裝機機身：機身主要由機座和墻板組成，為本機主體，借以支承所有其它零部件。詢價黎婷婷

鋁塑卷筒：包括鋁箔卷筒和塑片卷筒兩部分。卷筒主要由筒體、里外定子、制動圈和調節螺母等組成，筒體兩端用滾動軸承支承在支承軸上，為卷筒的轉動部分，當牽引塑料薄膜或鋁箔時，即帶動裝在卷筒上的卷料自由轉動。定子分里外定子，滑套在筒體外圓柱面上，并借固定螺釘固定在筒體的任意位置，用以裝固定不同寬度的卷料。制動圈套裝在筒體的里端外圓柱面上，并固定在支板上，為卷筒在靜止部分，用以制動筒體，擰緊或退出制動圈外圓周上4只調節螺釘，可增加或減少對筒體的制動力，使被牽引的薄膜或鋁箔獲得必要的張緊力，調節螺母旋裝在支承國并套裝在筒體的外端內圓柱面上，并用1臺軸承與銅體連接，在筒體旋轉的情況下，轉動調節螺母，可使筒體實現軸向移動，用以調節鄭料的橫向位置。支承軸固定在支板上，支板固定在機身上，構成卷筒的支承主體。

小計量顆粒包裝機采用正壓成形，加熱采用平板加熱。
滾模：本機關鍵部件，它與吸塑加熱器、熱封網輥相配合，先后完成泡罩成形、熱壓密封等工序。該部件主要由滾模、滾模軸、月形閥板以及真空和冷卻系統組成。滾模用硬鋁金制造，表面分布著泡窩，窩底鉆有微孔，通過月形閥板與真空吸氣管相通，使通過吸泡區段的塑料薄膜經加熱器幅射加熱軟化后，被吸成泡罩。滾模套裝在滾模軸上，用螺母固緊，變換藥品時，只要打開滾模密封端蓋松下螺母，即可更換滾模。滾模軸芯設有進、排水道。冷卻水通過水道進入滾模，起到冷卻作用。

加料器： 它主要由料、料槽、盤刷、滾刷及直流電機等組成，料用于儲存藥品。開啟閘板，藥品自行進入料槽，然后借助三只繞垂直軸轉動的盤刷將藥品刷入已成形的泡罩內，三只盤刷呈行星跡轉動，以提高加料器的填率，滾刷繞水平軸按順時針方向轉動，置于加料器的出口，將薄膜上未能進入泡罩的藥品刷入泡罩或刷回加料器。